Frost Giant (Female) 05 From RGSculpt
This is a a Huge 125 mm (high to Low) 3D Printed Model from RG Sculpt
This is a 3D printed resin Model (Grey Resin) , it has been cleaned, UV cured and is supplied un-assembled. While great care has been taken to clean the model and remove supports generated in the printing process, minor blemishes and scratches from this process may be found on the model. A fine grain sanding stick and portion of 2 part epoxy modeling putty is supplied with each print to facility fine tuning and assembly.
This model was printed hollow to reduce costs and shipping. Drain holes from the printing process have been filled with two part epoxy and blended into the sculpt
This Model Comes with a 50 x 75 mm FDM rectangular base (colors may vary). Additionally a 75x100m removable conversion sleeve is provided to upgrade this model to the "Big Brother" unit rules.
