I Current Carry Active License to Print Physical Models from:
RGSculpt
Caballero Miniatures
Lost Kingdom
Kyoushuneko
Lovecraft (Check Link to see Active Licenses)
TXARLI
GameScape3D
Asgard Rising
Resin Warfare
Highlands Miniatures
Draco Studios: Dragon Bond
The Printing Goes Every On (Product Page Coming soon))
I can print any file I can get a hold of, and legal sell copies. There are many free models on Thingiverse, yeggi, Gumroad, MyMiniFactory, and Cults3D. Such as these models themed from WH Total War by Emang/ Disorganized Snuffleupagus:
Cults3D WH TW Link
ARMY CONSLUTING
One of my favorite things to do is work with someone on an army project. I have chosen various license to be able to create many common army types. I enjoy helping find the right model and the resolving the all importent scaling issues with 3D models from various artists.
Check out some of the projects I have helped put Here: PROJECTS
Cults3D WH TW Link
ARMY CONSLUTING
One of my favorite things to do is work with someone on an army project. I have chosen various license to be able to create many common army types. I enjoy helping find the right model and the resolving the all importent scaling issues with 3D models from various artists.
Check out some of the projects I have helped put Here: PROJECTS
Note, I can print free models that have the appropriate license (thinigiverse, cults3D and/or other files that the end user and I both have the rights to (say if we are both on the same Patreon).
Note all models can be re-scaled to various sizes or flipped about their Axis to improved pose diversity. MOST ARTISTS SCULPT IN 32mm! This can cause a conflict when trying to mesh models with an existing 28 mm collection. I'm happy to work with you on the scale you need. Any other alterations to the Artists work is not permitted. Models can be provided uncured for ease in modification or post print conversion (resin is much easier to cut when un cured).
Resin Models
Unless Requested otherwise, all supports are careful removed and the Models UV cured. Even though great care is taken in removing support minor blemishes and artifacts from the printing process may be visible. The hobbyists may need to cleanup and lightly sand their models to their satisfaction. Two part epoxy modeling putty and fine grain sanding sticks can be provided upon request.
Large models (such as giants or scenic bases) are typically printed hollow, which requires drain holes. I have added 2-part epoxy putty to allow the owner to plug these holes, in some cases this may be done before sale.
FDM/PLA Plastic Models
I print my models at between 0.08 from 0.016 layer height depending on the necessary detail. None the less, nearly all FDM printed models typical will show layer lines at close inspection. I'm happy to provide close up images of the models I print. There are various goof techniques to mitigate visible layer lanes include sanding and simply a heavy primer coat of paint. Slight changes in vertical profile (say when print water) tends to show contour lines, these can also be addressed with sanding, heavy primer.
Any example painted models on this site our shown at the resolution I would print them, and have had minimal post processing (such as sanding) done to them.
Here are some other tips
How To Smooth PLA Prints
