3D Printing Services Overview

Items listed in the Web Store have already been printed and are ready to ship.  For custom printing services please contact us directly,

We can print any file we can get a hold of, and legally sell copies.  There are many free models on Thingiverse, yeggi, Gumroad, MyMiniFactory,  and Cults3D.  For example, these models themed from WH Total War by Emang/ Disorganized Snuffleupagus:
Cults3D WH TW Link

ARMY CONSULTING
One of our favorite things to do is work with someone on an army project. We have chosen various licenses to be able to create many common army types. We are happy to help to find the right model and resolve all important scaling issues with 3D models from various artists.

Check out some of the projects we have helped create here:  PROJECTS

Note, we can print free models that have the appropriate license (thinigiverse, cults3D and/or other files that the end user and us both have the rights to (say if we are both on the same Patreon).  

Note, all models can be re-scaled  to various sizes or flipped about their axis to improved pose diversity.  MOST ARTISTS SCULPT IN 32mm!  This can cause a conflict when trying to mesh models with an existing 28 mm collection. We are happy to work with you on the scale you need. Any other alterations to the Artists work is not permitted. Resin models can also be provided uncured for ease in modification or post print conversion (resin is much easier to cut when uncured).  

Resin Models
Unless requested otherwise, all supports are carefully removed and the models UV cured.  Even though great care is taken in removing support, minor blemishes and artifacts from the printing process may be visible. The hobbyists may need to clean up and lightly sand their models to their satisfaction.  2-part epoxy modeling, putty, and fine grain sanding sticks can be provided upon request.

Large models (such as giants or scenic bases) are typically printed hollow, which requires drain holes.  We have added 2-part epoxy putty to allow the owner to plug these holes, and in some cases this may be done before sale.

FDM/PLA Plastic Models
We print our models between 0.08 and 0.016 layer height depending on the necessary detail.  None the less, nearly all FDM printed models typical will show layer lines at close inspection.  We are happy to provide close up images of the models we print. There are various goof techniques to mitigate visible layer lanes including sanding and a heavy primer coat of paint. Slight changes in vertical profile (ex. when printing water) tend to show contour lines, and these can also be addressed with sanding and heavy primer.   

Any example painted models on this site are shown at the resolution that we would print them, and have had minimal post processing (such as sanding) done to them.

Here are some other tips:
   How To Smooth PLA Prints